The LWA10 genset is powered by the Lister Petter LPW2 water cooled engine. Offering power outputs between 6.1kVa and 8.1kVa. All Lister Petter gensets are available with Deepsea control panels, optional acoustic canopy and many other optional extras to configure the genset to your specifications.
The Lister Pettter powered LWA10 genset harnesses the power of the LPW2 water cooled engine to deliver the power needed for your applications. The LWA10 genset will produce power output of 6.1 kVA for a single phase 50 Hz setup while the three phase 50Hz setup will produce 8.1kVA, both at Prime Power ratings. As with all Lister Petter gensets the option to have it configured for 60Hz will give you an output of 7.4kVA for single phase while the three phase output will be at 9.9kVA with both at Prime Power ratings.
Numerous options and configurations are available for all Lister Petter gensets. Please contact our sales people for more information about your specific requiremnts.
Lister Petter LPW2 Engine
|Minimum Power 50Hz||
6.1kVA @ 1500rpm, 1phase PRP
|Maximum Power 50Hz||
8.1kVA @ 1500rpm, 3phase PRP
|Minimum Power 60Hz||
7.4kVA @ 1800rpm, 1phase PRP
|Maximum Power 60Hz||
9.9kVA @ 1800rpm, 1phase PRP
Meccalte UK Built ECP28C
|Fuel Tank Size||
Water Cooling – The LPW2 Alpha engine is fitted with water pump and radiator as standard. A pusher fan is used for airflow through the radiator to cool the engine.
Meccalte UK Alternator– All Lister Petter gensets are built with the award winning Meccalte UK ECP28 Single Bearing Alternator. These alternators are 4-pole brushless with solid state AVR as standard. The rotors and stators have class H insulation and are all IP23 protected.
Control Cubicle– All control cubicles are designed in house and controlled by Deep Sea Modules. This gives an electronic digital control facility with monitoring and warning indicators and automatic shutdown protection. The cubicle is built with output circuit breaker with over-current protection.
Manual/Remote Start– Lister Petter gensets have the flexibility of either manual or remote automatic start.
Low Maintenance Costs – On standard models, fuel filters, air filters, oil filters are all common across our ranges so no need to hold multiple part numbers. Seperate crankcase door allows easy access to the bottom end of the engine without needing to remove the top part of the engine.
Mechanical Governing – On all Alpha engines the governing is mechanical meaning no electrics to diagnose or replace. The simple governing ensures consistant performance of the engine.
Uptime – All lister Petter engines are built to be srong, rugged and reliable. This enables them to be run for many hours ensuring that your application is never unavailable. Alpha engines have a 500 hour service interval as standard. This can be increased significantly with our ‘Long Running’ options.
The Lister Petter LWA10 genset comes with the following items as standars
- Powered by Lister Petter LPW2 Engine
- Meccalte UK Alternator
- DSE Control Module
- 50 Hz or 60Hz setup
- 3 phase or single phase configuration
- 66 litre fuel tank
- Zirconium Phosphate powder coated base
- Forklift Pockets
- Bunded Base to 110% of all fluids
- Anti vibration mounts
- 12v battery and leads
- Emergency stop button
- Operators Handbook
- Electrical Diagrams
- Engine mounted silencer
Power outputs for the LWA10 generating set are shown below.
|Model||Rating||Single Phase 50Hz||Three Phase 50Hz||Single Phase 60Hz||Three Phase 60Hz|
|220 or 110V
230 or 115V
240 or 120V