T Series IRP Irrigation Pump Sets
Water Flow 25 – 550 m3/hr
Engines
TR1 | TR2 | TR3
Pump Size
50-200 | 80-160 | 100-200 | 125-200 | 150-200
Download the Engine Data Sheet
Engine outputs used for the design of the pump sets are continuous ISO 3046 ratings under NTP conditions. The pump sets are designed to ensure optimum performance, taking into account standard operating site conditions. The engine selection is made with at least 20% differential between the power absorbed by the pump and the engine output. This is to take into account site atmospheric conditions and poor fuel quality. In the event of high altitudes, please refer to LPL engineering to check engine compatibility.
The engine outputs after the above de-rating must be checked against the absorbed power by the pump.
The Lister Petter IRP Air Cooled Irrigation Pump Sets come with the following items as standard:-
- Lister Petter T series air cooled, direct injection, naturally aspirated (1, 2 and 3 cylinders)
- hand start
- starting handle
- continuous operation for up to 24 hours a day
- stationary or mobile configuration
- steel formed baseplate in black powder coating finish with 2 positioning feet under the base
- 66 litres polypropylene fuel tank
- heavy duty, single stage, centrifugal, end suction pump with cast iron casing and impeller
- suction and delivery flanges conforming with DN2533/PN16 –ISO7005-2/PN16
- soft packed stuffing box used for shaft seal hardened chrome steel shaft sleeve to protect pump shaft
- operators' handbook
Options items
- 12V electric start, control panel, battery and leads
- off-road trailer with 2 wheeled axle, tow bar and positioning stands, towing speed limited to 25 km/hr maximum
