TR1 Build 16 Engine
Variable Speed
900 | 2000 r/min
4.1 – 8.0 kw | 5.5 – 10.7 bhp
Download the Engine Data Sheet
The TR1 build 16 engine is designed for continuous operation in ambient temperatures up to 40°C (104°F).
The Lister Petter TR1 build 16 air cooled engines comes with the following design and equipment:-
- medium duty air cleaner
- hand start
- combined inlet and exhaust manifold
- self vent fuel system with individual fuel injection pumps
- fuel filter
- self regulating plunger type lubricating oil pump
- spin-on lubricating oil filter
- decompressor levers
- open flywheel with cooling fan
- sheet metal fan shroud
- 250 hour service intervals
- operators' handbook
Optional Items
- pepper-pot exhaust silencer
- engine mounted fuel tank
- PTO via flywheel shaft extension
Full Engine Specifications:
Power Output
| TR1 Build 16 Engine | |||
|---|---|---|---|
| RPM | 1500* | 1800* | |
| Continuous Power | kWm | 5.6 | 6.6 |
| bhp | 7.5 | 8.8 | |
| Fuel Stop | kWm | 6.2 | 7.3 |
| bhp | 8.3 | 9.8 | |
Fuel Consumption
| TR1 Build 16 Engine | |||
|---|---|---|---|
| Load | 1500* | 1800* | |
| g/kWh | 229 | 238 | |
| l/h | 1.5 | 1.9 | |
Technical Data
| TR1 Build 16 Engine | ||
|---|---|---|
| Type of fuel injection | Direct | |
| Number of cylinders | 1 | |
| Aspiration | Natural | |
| Direction of rotation looking on flywheel end | Anti clockwise | |
| Compression ratio | 15.5:1 | |
| Minimum idling speed | r/min | 850 |
| Number of flywheel ring gear teeth | 110 | |
| Nominal cylinder bore | mm | 98.42 |
| in | 3.875 | |
| Stroke | mm | 101.6 |
| in | 4.0 | |
| Total cylinder capacity | litre | 0.773 |
| in 3 | 47.17 | |
| Crankshaft end thrust (maximum continuous) |
kgf | 132 |
| lbf | 290 | |
| Crankcase vacuum (minimum) |
mbar | 2.0 |
| in H2O | 0.8 | |
| Crankcase vacuum (average) |
mbar | 3.5 |
| in H2O | 1.4 | |
| Lubricating oil pressure (mean) with the oil at 110°C (230°F) |
bar | 2.0 |
| lbf/in2 | 29 | |
